APPLICATION · PACKAGING & KRAFT
Packaging & Kraft Paper Chemicals
Compare strength, surface sizing and dryer-section chemical options for packaging paper and paperboard.

Application overview
Packaging-paper procurement typically starts from board strength, water resistance, surface treatment or production efficiency. A chemical program must fit the furnish, recycled-fiber proportion, paper machine and converting requirements. This guide links Aupha Chem’s existing product pages to those specific selection questions without implying that one grade fits every packaging application.
Where chemical selection matters
Wet-end strength development
Compare dry strength and wet-strength requirements separately. Specify which paper property is short of target and how the mill measures it; check potential interactions with retention and drainage.
Surface sizing and water resistance
For grades requiring surface treatment, compare published styrene-acrylic and AKD sizing products. Selection depends on paper grade, size-press conditions, water-resistance test methods and downstream printing or converting objectives.
Dryer-section release and process stability
Where sheet sticking or stripping is an issue, review the listed packaging-paper stripping agent together with cylinder conditions and the current release program.
Related Aupha Chem product families
Select products according to the process and compare the published pages. The listings below do not imply interchangeability or confirm a grade-specific recommendation.
Dry Strength Agent
Evaluate dry-strength development alongside formation, drainage and finished sheet requirements.
Wet Strength Agent
For grades that require strength retention under wet conditions; evaluate against furnish and end-use requirements.
AKD Surface Sizing Agent
Assess water resistance and surface sizing together with the base sheet and size-press formulation.
Styrene-Acrylic Surface Sizing Agent
A published surface-sizing option to compare for the target paper and paperboard grade.
Mineral Oil-Based Stripping Agent for Packaging Paper
A sheet-release product listed for packaging-paper dryer applications.
Retention & Drainage Aid
Consider fines retention and drainage jointly; avoid evaluating either in isolation.
Key information before grade selection
- Paper or board grade, furnish source, recycled percentage and basis weight
- Dry or wet strength requirements, water absorption/sizing target and test method
- Current process flow, chemical addition points, pH and drying conditions
- Printing, laminating, corrugating or other downstream converting needs
Technical evaluation notes
Surface sizing is not a substitute for correcting wet-end strength deficiencies.
Do not extrapolate a product’s solid content into a recommended addition rate without a trial.
Specify the end-use and laboratory test method when requesting an appropriate grade.
Frequently asked questions
Should packaging grades use dry strength or wet strength chemistry?
The answer depends on the property required in use. Dry strength and wet strength are distinct targets; compare actual sheet tests rather than selecting solely from the name.
AKD or styrene-acrylic surface sizing agent?
Both product types are listed. Selection should consider the base sheet, application method, targeted water resistance, additives and converting requirements.
What should be sent with a request for quotation?
Provide the board grade, process, monthly demand, required performance, trial conditions and the current supplier’s comparable specification if available.
Application-specific Selection Guides
Explore a specific operating problem and the product information needed to evaluate a suitable chemical grade.
Packaging Strength & Surface Sizing
Review production variables, related published products and the technical details to include in a quotation request.
Dryer Cylinder Sheet Release
Assess dryer sticking, sheet breaks and release chemistry in packaging paper and paperboard production.
Request an application-specific recommendation
Share the packaging grade, target strength or Cobb/water-resistance test, sizing method, furnish and expected purchase volume. We will use this information to discuss available published product types and which technical documents or trials are needed.
