
Paper Strength Agents · Wet Strength
Wet Strength Agent for Paper and Paperboard
Wet Strength Agent is a water-soluble, cationic and thermosetting resin used to improve paper strength when wet. Its suitability depends on the paper grade, furnish, target wet-strength properties and the mill’s existing process conditions.
Use the published specifications below as a starting point for grade evaluation. Confirm the current technical documentation, test conditions, addition sequence and operating limits for your machine before a mill trial.
As listed in the current product information.
Confirm the specification for the selected grade.
Review wet-strength targets alongside sheet formation and machine stability.
Applications and process considerations
Wet strength resin is used where paper or paperboard needs to retain strength under wet conditions. Potential applications depend on the grade and mill requirements. Evaluate compatibility with the furnish, process water and existing wet-end chemistry, and confirm the intended performance through controlled testing.
Information to share for product evaluation
- Paper grade, end use and target wet-strength properties
- Furnish composition, recycled fiber share and filler content, where known
- Current wet-end additives and known compatibility constraints
- Proposed addition point and sequence within the existing program
- Available pH, temperature and process-water information
- Test method and performance indicators to monitor during a trial
Published technical specifications
The following wet strength agent specifications are currently published.
| Appearance | Light yellow transparent liquid |
|---|---|
| Solid content | 15–25% |
| pH value | 3.0–5.0 |
| Ionic type | Cationic |
| Viscosity | 25–80 cps |
| Application | Improving wet strength of paper |
Density is not listed in the currently published product information. Please request the latest technical data sheet for grade-specific values, test methods and storage guidance.
How to evaluate the product
Before a paper-machine trial, confirm product preparation, addition point and sequence using the current technical documentation and the mill’s process conditions. Under controlled conditions, compare agreed wet-strength measurements and monitor sheet formation and machine runnability.
Dosage and operating limits depend on furnish, paper grade, machine conditions and the chemical program in use. We do not recommend a generic dosage without reviewing those details.
What should a tissue wet-strength trial record?
Specify the tissue grade, furnish and wet-strength test method. Compare the baseline and trial results alongside softness and absorbency so the product can be judged against the finished-sheet requirements.
Discuss a wet strength trial
Share your paper grade, furnish, current wet-end program, addition point and target strength properties so our team can review the application.
Request product information