APPLICATION · PAPER COATING
Coated Paper & Paperboard Applications
Primary-coat and top-coat SBR latex selection, surface treatment and formulation questions for coated grades.

Application overview
Primary coating and top coating are different formulation stages. A binder selected for the first layer should not be assumed to match the finish-layer requirements. Aupha Chem lists separate SBR latex products for these duties, alongside surface sizing and optical brightening agents for specific paper and paperboard needs.
Where chemical selection matters
Base paper and surface preparation
Define the base paper, absorbency, sheet strength and intended coated end use. A surface sizing step may influence the base sheet’s interaction with the coating formulation.
Primary-coat binder selection
Evaluate the listed primary-coat SBR latex with the pigment package, coating solids, viscosity target and coater configuration. Test pigment binding and adhesion under real formulation conditions.
Top-coat and appearance targets
For the top layer, consider the separate top-coat SBR latex grade and evaluate surface properties, printability, coating uniformity and downstream finishing. Optical brightening is a distinct question.
Related Aupha Chem product families
Select products according to the process and compare the published pages. The listings below do not imply interchangeability or confirm a grade-specific recommendation.
SBR Latex for Primary Coating
A binder for primary coating; evaluate pigment binding and coat adhesion in the target formulation.
SBR Latex for Top Coating
A separate top-coat binder grade; compare with the top-layer performance objectives.
Styrene-Acrylic Surface Sizing Agent
A published surface-sizing option to compare for the target paper and paperboard grade.
AKD Surface Sizing Agent
Assess water resistance and surface sizing together with the base sheet and size-press formulation.
Optical Brightening Agent
Explore where the grade requires brightness enhancement; suitability depends on the application.
Key information before grade selection
- Base paper grade, coating side(s) and application stage
- Pigment formulation, binder requirements, target coating solids and viscosity
- Coater type, drying profile, expected surface/print performance
- Current formulation, process concerns, target consumption and trial plan
Technical evaluation notes
The primary-coat and top-coat SBR grades should be evaluated separately.
Do not infer finished-paper print performance from latex solids content alone.
Check compatibility of each component in the complete coating formulation.
Frequently asked questions
Are primary and top coating SBR latex the same product?
Aupha Chem publishes distinct product pages for primary and top coating grades. Compare grade-specific documentation and trial performance rather than treating them as interchangeable.
Does surface sizing replace coating latex?
No. Surface sizing and latex binder selection address different aspects of the paper and coating process.
What information helps select a coating binder?
The formulation, pigment system, coating stage, desired properties, coater details and benchmark product specification are the most useful inputs.
Application-specific Selection Guides
Explore a specific operating problem and the product information needed to evaluate a suitable chemical grade.
Primary vs Top Coating SBR Latex
Review production variables, related published products and the technical details to include in a quotation request.
Optical Brightener Trial
Set the test method, reference sheet and acceptance target before comparing optical results.
Request an application-specific recommendation
Send your primary/top-coating process, pigment and binder formulation, target surface performance, and estimated monthly latex demand. We will use this information to discuss available published product types and which technical documents or trials are needed.
