Styrene-acrylic Surface Sizing Agent

Styrene-acrylic Surface Sizing Agent

Paper Sizing Agents · Styrene-acrylic

Styrene-acrylic Surface Sizing Agent for Paper

A surface sizing emulsion for paper and paperboard. Depending on the grade, it may be cationic or anionic and can be evaluated for water resistance, surface strength and print performance.

Use the published product data below as a starting point for grade evaluation. Confirm the current TDS, test methods and operating limits before a trial.

Product formLight yellow-brown emulsion

Appearance listed in the published product information.

Solid content25–30%

Confirm the specification for the selected grade.

Evaluation focusPaper surface properties

Evaluate water resistance, surface strength and print performance.

Application and grade selection

Styrene-acrylic Surface Sizing Agent is used for paper and paperboard surface treatment. Assess the suitable grade against the required water resistance, surface strength and print quality.

Information to share before evaluation

  • Paper grade, sizing method and target surface properties
  • Fiber furnish and additives currently in use
  • Required ionic type and current addition sequence
  • Process conditions and available pH and temperature data
  • Test method and indicators to track during a mill trial

Published technical data

The values below reproduce the published specifications for Styrene-acrylic Surface Sizing Agent.

AppearanceLight yellow-brown emulsion
Solid Content25–30%
pH Value2.0–6.0
Ionic TypeCationic / Anionic
Viscosity50 cps
ApplicationPaper surface sizing

Viscosity test conditions are not listed here. Actual performance depends on furnish, formulation and operating conditions. Validate grade suitability through controlled trials.

How to evaluate the product

Before a production trial, confirm the required ionic type, product preparation and addition sequence against the current TDS and the mill’s chemical program. Evaluate water resistance, surface strength and print performance on the target paper grade.

Dosage and operating limits depend on the paper grade, formulation and process conditions. We do not recommend a generic dosage without reviewing the system.

How should buyers compare styrene-acrylic and AKD surface sizing?

Compare them on the intended paper grade with the same water-resistance test. Provide the size press conditions, required ionic type and surface-strength or print targets, since water resistance is only one of the evaluation criteria.

Read the packaging paper strength and sizing guide

Discuss a Styrene-acrylic Surface Sizing Agent evaluation

Share the paper grade, required ionic type, sizing method and target surface properties so our team can review the application.

Request Product Information

← View all Paper Sizing Agents