Liquid Retention & Drainage Aid

PAPER FUNCTIONAL AGENTS · WET-END CHEMISTRY

Liquid Cationic Retention & Drainage Aid for Papermaking

Retention & Drainage Aid is a liquid cationic acrylamide copolymer for wet-end papermaking. It is used in process programs that aim to support the retention of fine fibers and fillers while improving water release during drainage.

Its performance depends on the furnish, paper grade, machine conditions and existing wet-end chemistry. A mill-specific evaluation helps establish the right balance of retention, drainage, formation and runnability.

PRODUCT FORMLiquid
POLYMER TYPECationic acrylamide copolymer
PROCESS AREAWet-end papermaking
FUNCTIONRetention and drainage

PROCESS BENEFITS

Support retention and drainage together

Retention and drainage are connected parts of wet-end performance. Evaluate them together with formation and machine stability when selecting a program.

01

Fine-fiber and filler retention

Designed to support the retention of fines and fillers in the sheet and help manage solids carryover to white water.

02

Water release

Helps mills address drainage targets as part of a balanced wet-end chemistry program.

03

Mill-specific evaluation

Selection should reflect furnish, filler loading, paper grade, machine configuration and the retention system already in use.

APPLICATIONS

For wet-end papermaking programs

Consider this product where both solids retention and drainage are process priorities. Product fit should be assessed against the mill’s paper grade, fiber furnish, filler level and operating conditions.

It can be evaluated within an existing retention program to determine compatibility and the effect on overall machine performance.

Information for product selection

  • Paper grade and target sheet properties
  • Fiber furnish and filler type or loading
  • Current retention and drainage chemistry
  • Machine conditions and proposed addition point
  • Process pH or charge-demand data, when available
  • Performance indicators the mill wants to improve

PRODUCT PROFILE

Technical data

The values below match the product information currently published by Aupha Chem. Confirm the test conditions and the applicable grade-specific TDS before use.

AppearanceMilky white liquid
Solid content (%)35%
Ionic chargeCationic
Density (g/cm³)1.1
Apparent viscosity (mPa·s)1600
UL viscosity (cP·s)4.0 (confirm the unit and test method in the grade-specific TDS)
pH6.0–8.0

Dosage, preparation, addition point and operating limits vary by grade and machine. Request the current TDS and confirm test methods before a mill trial.

MILL TRIAL

Evaluate with your process conditions

Before a trial, review the current TDS and agree on the preparation, feed point, dosage range and test plan with the mill team. Monitor retention and drainage alongside formation, white-water solids and machine stability.

FITFurnishMachineChemistryTargets

FAQ

Frequently asked questions

Is this a powder retention aid?

No. This product is a liquid cationic acrylamide copolymer. Confirm the grade and handling instructions in the current TDS.

Can it support both retention and drainage?

It is intended for wet-end programs where both are evaluation targets. Actual results depend on the furnish, machine conditions and the full chemical program.

How should dosage and feed point be selected?

Use the grade-specific TDS and mill conditions to set a trial plan. We do not recommend a generic dosage without reviewing the application.

How should a mill compare retention and drainage in the same trial?

Record retention, drainage and formation for both the baseline and trial. Where incoming recycled furnish varies, record the furnish mix and water-loop conditions alongside the results so that the comparison reflects the actual run.

Read the recycled-fiber retention and drainage guide

See also: Powder Retention Aid.

AUPHA CHEM · SMART CHEMISTRY. BETTER PERFORMANCE.

Discuss a Retention & Drainage Aid evaluation

Share your paper grade, furnish, current wet-end program and process targets. Our team can review the application and provide current product information.