MILL TRIALS · BUYER CHECKLIST

Paper Chemical Trial Planning Guide

Before requesting a sample, define the paper grade, current process and result you want to measure. Use this guide to prepare a clear technical brief and compare trial observations with the existing baseline.

Start with a specific mill question

A trial should answer an application question, such as whether a candidate sizing agent meets a stated water-resistance target on a particular grade, or how a retention program affects both white-water solids and sheet formation. Record the current condition first, agree on the measurement method, and identify any operating changes that could affect the comparison.

This is a planning checklist for procurement and technical teams. Product grade, dosage, addition point, handling and test conditions must be reviewed against the current grade-specific documents and the mill’s own procedures.

One-page brief: information to collect

01 · APPLICATION

Grade and objective

Paper or board grade, end use, machine or treatment unit, observed problem, target property and the test method used to judge it.

02 · CURRENT BASELINE

What happens today

Current chemistry or product specification, typical operating range, recent test results and the period chosen as the comparison baseline.

03 · PROCESS CONTEXT

What may influence results

Furnish and recycled-content mix where relevant, water-loop conditions, pH or temperature if measured, addition location, and other chemicals in use.

04 · PURCHASING

What supply must fit

Estimated consumption, desired packaging, delivery destination and schedule. State the required TDS, SDS and any market-specific documentation.

Protect confidential process data: if a full recipe cannot be shared, provide a useful range, the relevant test method and a description of known compatibility concerns. Missing values can be marked “to confirm.”

Documents and sample questions

Ask for the latest grade-specific technical data sheet and safety data sheet before handling a product. Confirm sample availability, sample quantity and packaging, storage conditions, shelf life, transport requirements and whether the candidate is intended for your specific paper grade and process. A published product family page is a starting point; it is not a substitute for the documentation of the exact grade offered.

Keep the sample identifiable

Record the product grade, batch or lot number shown on the label, date received and any visible packaging damage. Keep these details with the TDS/SDS revisions and the trial results. If the label or documents do not match the agreed sample, clarify the discrepancy before use.

Use the TDS, SDS and COA buying checklist to distinguish technical properties, safety information and batch records before a production order.

A practical evaluation sequence

STEP 01

Define success

Choose the property or process measure, test method and acceptance criteria before the candidate is introduced.

STEP 02

Capture baseline

Record current settings, chemistry, furnish and measured results during a representative period.

STEP 03

Screen suitability

Review the candidate grade’s documents, handling needs and possible interactions with the existing chemical program.

STEP 04

Run and log

Agree on the mill-approved test plan; record time, feed conditions, relevant process changes and samples for comparison.

STEP 05

Review together

Compare the planned measures and side effects, then confirm grade, packaging and supply details for any next step.

Do not infer a cause from one changed measurement while furnish, machine settings or other additives are also moving. Have the mill’s technical team approve the trial procedure and any chemical change.

What to record by application

Choose only measures relevant to your process and use your mill’s established methods. The examples below are observation categories, not performance promises.

Application Baseline and trial observations Related Aupha Chem pages
Wet-end retention and drainage Furnish and ash, white-water solids, drainage behavior, sheet formation and runnability. Retention & drainage guide
Sizing and strength Specified water-resistance or strength test, sheet quality, furnish and existing additive program. Packaging selection guide
Tissue creping and release Yankee surface condition, coating behavior, sheet release, breaks and finished-sheet targets. Yankee chemical guide
Coating latex Coating formulation and coating-color solids, application conditions, coating performance and relevant printed or finished-sheet tests. SBR latex selection guide
Water and wastewater Inlet characteristics, treatment objective, clarification or sludge-handling results and residual handling needs. PAC vs PAM guide
Sludge dewatering polymer trial
Foam control Foam location, current dosing point, drainage, deposits and sheet quality under comparable conditions. Defoamer selection guide
Recovered-paper deinking Recovered furnish and ink mix, pulp cleanliness, brightness, yield and foam. Deinking trial guide
Press felt cleaning Felt position and age, deposit pattern, permeability and water removal after cleaning. Felt cleaning trial guide
Optical brightening The agreed whiteness or brightness method, reference sheet, target and finished-sheet appearance. Optical brightener trial guide
Dryer-cylinder release for packaging paper Affected cylinder, onset of sticking, breaks over comparable production and surface quality. Dryer cylinder release trial guide

Example: concise sample request

“We produce [paper grade] using [main furnish]. We are evaluating [chemical family or process problem] to improve [measured target]. Our current product or specification is [reference], and we can share [relevant test results]. Please advise the grade-specific TDS/SDS, sample availability and the information you need to assess trial suitability. Our expected demand is [quantity] for delivery to [country].”

Explore application-specific guidance

Questions before a mill trial

Can we choose a dosage from the website?

No. A trial range and addition procedure depend on the exact grade, furnish, current chemistry and mill conditions. Request current product documentation and agree the plan with the mill’s technical team.

What if we do not know the exact chemical needed?

Describe the paper grade, process issue, current method and measured target. Start from the application index to narrow the relevant product family.

What should procurement confirm beyond the test result?

Confirm the offered grade and documents, packaging, storage and transport requirements, expected consumption, delivery destination and supply schedule.

Does this guide replace a technical trial plan?

No. It helps organize the brief and records. The mill and supplier must review grade suitability, safe handling and the actual trial procedure.

Share your trial brief

Send the paper grade, current process, target measure and purchasing requirements. Ask for the documents and sample options for the exact product grade under consideration.

Request a Paper Chemical QuoteContact Aupha Chem