Paper Functional Agents
Paper Mill Defoamer Selection
Compare three papermaking defoamer types and plan a trial for foam, drainage and sheet quality.

Selection criteria
Start with the foam location and its effect on production. Compare the products under the same mill conditions and review foam control alongside drainage, deposits and sheet quality.
Trial plan
Locate the foam
Record where it first appears and where it affects production. Note whether the foam is at the surface or entrained in the stock.
Set the baseline
Record the furnish, process water, pH, temperature, current defoamer and addition point.
Agree on a pass criterion
Use the same foam measurement method for baseline and trial. Track drainage, deposits, sheet spots and machine stability alongside foam.
Products to evaluate
Polyether-Based Defoamer
Check which published pH value applies to the original product and which applies to the 1% solution.
Silicone-Based Defoamer
Compare the published solids and viscosity. Confirm the test conditions for the grade proposed for trial.
Fatty Alcohol-Based Defoamer
Review the published solids and centrifugal stability, then confirm preparation and feed instructions.
What to share in your inquiry
- Paper grade and furnish
- Foam location and observed production impact
- Operating conditions, existing chemistry and dosing point
- Baseline values, trial criteria and sample needs
Use the mill trial checklist to prepare your sample request →
Buyer questions
Which chemistry should we try first?
Shortlist grades against the foam source, water conditions and existing chemistry, then compare with the current program under controlled conditions.
Is reducing visible foam enough?
Check the process and sheet-quality measures that prompted the trial, including any impact on drainage or deposits.
Discuss your application with Aupha Chem
Share the operating conditions, baseline and trial objective.
