TISSUE · YANKEE DRYER

Yankee Creping and Sheet Release Chemicals

Evaluate adhesion, controlled release and tissue runnability together, rather than selecting one chemical from symptoms alone.

Yankee Creping and Sheet Release Chemicals application reference

What purchasing and technical teams need to know

Tissue sheet adhesion to the Yankee cylinder must be sufficient for stable drying and creping, yet controlled release must occur at the blade. Blade conditions, coating build-up, sheet moisture, furnish and release chemistry can influence the result. Aupha Chem lists different products for creping modification and sheet release; these are starting points for evaluation, not a ready-made dosing recipe.

Symptoms and evaluation priorities

PROCESS ISSUE 01

Sheet sticking or unstable release

Record whether sticking occurs during start-up, grade change or steady operation. Check coating coverage, blade status and current release chemical before switching a grade.

PROCESS ISSUE 02

Unstable crepe structure

Compare sheet moisture, machine conditions, existing adhesive/modifier program and blade parameters across good and poor runs.

PROCESS ISSUE 03

Coating deposits and blade wear

Investigate spray distribution, dryer surface and deposit patterns. Do not assume that a higher release-chemical addition will solve mechanical problems.

Published Aupha Chem product options

These are links to existing product descriptions, not claims of universal suitability. Check current grade-specific TDS, SDS, sample requirements and trial results before ordering.

Prepare an effective quotation request

Provide the details below so a relevant grade can be shortlisted and any missing engineering data can be identified.

  • Tissue grade, basis weight, furnish and machine speed
  • Yankee diameter, temperature, blade and spraying configuration
  • Current creping/release agents, addition points and observed issue
  • Monthly demand, destination, trial criteria and required documentation

Frequently asked buyer questions

Are a creping modifier and a stripping agent interchangeable?

No. They address distinct roles within a coating and release program; their compatibility should be established under the mill’s actual conditions.

Can you provide a universal dosage?

No. Application rates and conditions require the grade-specific TDS and controlled trials.

Which product should be trialed first?

Identify whether the main problem is sheet adhesion, uncontrolled release, blade condition or coating deposits, then shortlist relevant chemistry.

Dryer sticking in packaging paper

For packaging paper or paperboard, see the dryer cylinder sheet release guide for break counts, cylinder observations and trial targets.

Request the right chemical grade

Tell us about the production process, target performance, current product and planned order volume. Ask for technical information, a trial sample or a quotation.

Request Product Information & QuoteContact Aupha Chem