APPLICATION · RECYCLED FIBER
Recycled Fiber Papermaking Chemicals
Deinking, fines retention, drainage, foam and felt-cleaning chemical selection for recycled furnish.

Application overview
Recovered paper furnish varies in ink load, stickies, fines, ash and dissolved or colloidal substances. That variability affects deinking, stock preparation and machine performance. This application page organizes Aupha Chem’s published functional additives around the mill’s actual process problems rather than recommending a fixed additive recipe.
Where chemical selection matters
Deinking and stock preparation
Where ink removal is required, evaluate a deinking agent within the mill’s actual pulping, flotation or washing process. Establish baseline ink removal, yield and water-system behavior first.
Retention, drainage and formation
Retention and drainage need to be balanced against sheet formation, fillers, process water conductivity and stock chemistry. Selecting a retention aid solely for the highest measured retention can be counterproductive.
Foam, deposits and fabric cleanliness
Assess foam-control chemistry in the actual process conditions. Felt cleaning and defoaming address different issues; identify whether defects originate from foam, deposits, drainage or the furnish.
Related Aupha Chem product families
Select products according to the process and compare the published pages. The listings below do not imply interchangeability or confirm a grade-specific recommendation.
Deinking Agent
A relevant chemical option during recycled-fiber ink-removal evaluation.
Retention & Drainage Aid
Consider fines retention and drainage jointly; avoid evaluating either in isolation.
Polyether-Based Defoamer
A foam-control option to screen with the specific process water and additive system.
Silicone-Based Defoamer
A separate defoamer chemistry to compare during compatibility and foam tests.
Felt Cleaning Agent
Supports discussions about deposits and cleaning programs for paper-machine felts.
Dry Strength Agent
Evaluate dry-strength development alongside formation, drainage and finished sheet requirements.
Key information before grade selection
- Recovered-fiber mix, ash, fines and visible contaminant load
- Pulping/deinking process, current chemicals and water-loop condition
- Retention, drainage and formation measurement methods
- Foam location, fabric deposits, machine speed and production goals
Technical evaluation notes
The deinking product must be tested with the actual recovered-fiber mix.
High retention without acceptable drainage and formation is not a complete success.
Cleanliness issues should be diagnosed before choosing a defoamer or felt-cleaning grade.
Frequently asked questions
Can retention and drainage be improved by the same chemical?
Some programs are designed around both objectives, but improvement depends on furnish and wet-end conditions. Both metrics must be measured in the trial.
Which defoamer should a recycled-fiber mill request?
Aupha Chem lists several defoamer chemistries. Selection requires foam-source information and compatibility testing against the existing process.
Is a deinking agent always required for recycled paper?
Not necessarily. The need depends on incoming furnish and whether the process needs printing ink removal.
Application-specific Selection Guides
Explore a specific operating problem and the product information needed to evaluate a suitable chemical grade.
Retention & Drainage in Recycled Paper
Review production variables, related published products and the technical details to include in a quotation request.
Recycled Paper Deinking Trial
Plan a trial using comparable furnish and agreed measures for pulp quality, yield and foam behavior.
Felt Cleaning Trial
Record felt position, deposit recurrence and water removal before evaluating a cleaning program.
Paper Mill Defoamer Selection
Locate the foam source and compare defoamers against the mill’s current program.
Request an application-specific recommendation
Send the recovered-paper furnish, deinking process, wet-end conditions, deposit or foam issue, and target sheet grade. We will use this information to discuss available published product types and which technical documents or trials are needed.
