APPLICATION · TISSUE PAPER

Tissue Paper Production Chemicals

Chemical selection across tissue wet-end operations, Yankee creping, sheet release and softness targets.

Tissue Paper Production Chemicals industrial process reference

Application overview

A tissue mill needs more than an isolated chemical grade. Its wet-end furnish, Yankee coating, creping blade conditions, release behavior and finished sheet properties interact. Aupha Chem’s listed product families provide starting points for discussing a tissue chemical program; final selection must be confirmed by the mill’s grade and operating conditions.

Where chemical selection matters

PROCESS STAGE 01

Wet-end balance

Review furnish composition, recycled content, fines retention, drainage, foaming and any wet-strength requirements. An improvement in one measure should not be allowed to destabilize formation or runnability.

PROCESS STAGE 02

Yankee coating and creping

Stable adhesion and controlled sheet release are competing needs. Review coating chemistry, blade operation, cylinder temperature, tissue basis weight and release performance together. A creping modifier and release agent serve different roles.

PROCESS STAGE 03

Finished sheet performance

Confirm whether the priority is softness, wet tensile strength, absorbency or process stability. These objectives may call for separate product evaluations and compatibility trials.

Related Aupha Chem product families

Select products according to the process and compare the published pages. The listings below do not imply interchangeability or confirm a grade-specific recommendation.

Creping Adhesive Agent

Evaluate controlled sheet adhesion on the Yankee dryer alongside the complete coating and release program.

View product data →

Creping Modifying Agent

Review in the Yankee coating program and assess its contribution to creping behavior.

View product data →

Mineral Oil-Based Stripping Agent for Tissue Paper

A release-control option for tissue dryer-cylinder programs; confirm compatibility in mill trials.

View product data →

Softening Agent

A functional option to investigate when tissue hand-feel and softness are part of the grade targets.

View product data →

Wet Strength Agent

For grades that require strength retention under wet conditions; evaluate against furnish and end-use requirements.

View product data →

Retention & Drainage Aid

Consider fines retention and drainage jointly; avoid evaluating either in isolation.

View product data →

Key information before grade selection

  • Creping uniformity and sheet release at the Yankee cylinder
  • Wet-end furnish, water chemistry, pH and existing additive sequence
  • Finished tissue grade, basis weight, wet-strength and softness targets
  • Current chemical use points, trial conditions and operational constraints

Technical evaluation notes

CHECKPOINT 01

Do not choose an adhesive or release product from its appearance alone; assess the complete Yankee program.

CHECKPOINT 02

A wet-strength program should be evaluated against target sheet properties and downstream repulpability requirements.

CHECKPOINT 03

Request an up-to-date grade-specific TDS and handling information before a machine trial.

Frequently asked questions

Which product should a tissue mill evaluate first?

Start with the process limitation: Yankee release, creping stability, softness, strength or drainage. The relevant chemical families differ, and the mill’s existing program determines the appropriate first trial.

Are creping modifiers and stripping agents interchangeable?

No. They are listed as separate product types with different process roles. Their interaction must be checked in the actual dryer-cylinder program.

Can a single product guarantee better softness and runnability?

No. Finished sheet properties and machine stability depend on raw materials, operating conditions and the complete chemical program. Mill trials are necessary.

Application-specific Selection Guides

Explore a specific operating problem and the product information needed to evaluate a suitable chemical grade.

Yankee Creping & Sheet Release Guide

Review production variables, related published products and the technical details to include in a quotation request.

Read the buyer’s guide →

Tissue Softness vs Wet Strength

Review production variables, related published products and the technical details to include in a quotation request.

Read the buyer’s guide →

Request an application-specific recommendation

Send the tissue grade, basis weight, furnish, Yankee/coating details, current treatment, and the main quality or runnability issue. We will use this information to discuss available published product types and which technical documents or trials are needed.

Request Technical InformationAll Applications