PACKAGING PAPER · DRYER SECTION
Dryer Cylinder Sheet Release for Packaging Paper
Compare mineral oil and silicone release options for packaging paper. Record cylinder sticking, sheet breaks and the current release program before a mill trial.

Confirm where the sheet starts to stick
Record which cylinder or dryer group is affected, which grades are running and when breaks occur. If sticking is concentrated in one section, record the surface condition and current chemical application at that point before comparing release agents.
Match the product to the paper grade and dryer program
Mineral oil release agent for packaging grades
This grade is listed for packaging paper and paperboard. Review its published viscosity at 25°C and cold-water solubility, then confirm preparation and compatibility with the mill’s delivery system.
Silicone release agent for paper machine dryers
Review this option against the dryer surface, application method and downstream coating or converting requirements. Confirm the proposed grade and the test conditions from its current TDS.
For a tissue machine where the Yankee coating and creping blade are part of the problem, see the Yankee creping and sheet release guide.
What to compare during a mill trial
Sticking and sheet breaks
Record the baseline and trial break counts over comparable run time or production volume. Separate breaks associated with sticking from breaks with other known causes.
Dryer and application conditions
Record paper grade, affected cylinder, line speed, relevant drying conditions, current agent and application method. Note grade or operating changes during the trial.
Sheet quality and downstream fit
Check the mill’s usual surface-quality and converting indicators along with release and runnability. Inspect for deposits or marks during the agreed observation period.
What to include in your inquiry
- Packaging paper grade, basis weight and use of the finished sheet
- Affected dryer cylinder or group, surface condition and when sticking begins
- Current release chemistry, application method and baseline break frequency
- Trial targets, required documentation, order volume and destination
Use the mill trial checklist to prepare your sample request →
Buyer questions
Can the tissue and packaging paper mineral oil grades be used interchangeably?
Aupha Chem lists separate grades for the two applications. Confirm the intended paper grade, dryer surface and application system against the current TDS and a representative trial.
Should we choose the grade with the lower published viscosity?
Use the viscosity specification to check how the grade fits the application system. Confirm test conditions and evaluate release, sheet quality and compatibility under the mill’s actual operating conditions.
Discuss a packaging paper release trial
Send the affected dryer location, existing release program and acceptance criteria.
