TISSUE · YANKEE DRYER
Yankee Creping and Sheet Release Chemicals
Evaluate adhesion, controlled release and tissue runnability together, rather than selecting one chemical from symptoms alone.

What purchasing and technical teams need to know
Tissue sheet adhesion to the Yankee cylinder must be sufficient for stable drying and creping, yet controlled release must occur at the blade. Blade conditions, coating build-up, sheet moisture, furnish and release chemistry can influence the result. Aupha Chem lists different products for creping modification and sheet release; these are starting points for evaluation, not a ready-made dosing recipe.
Symptoms and evaluation priorities
Sheet sticking or unstable release
Record whether sticking occurs during start-up, grade change or steady operation. Check coating coverage, blade status and current release chemical before switching a grade.
Unstable crepe structure
Compare sheet moisture, machine conditions, existing adhesive/modifier program and blade parameters across good and poor runs.
Coating deposits and blade wear
Investigate spray distribution, dryer surface and deposit patterns. Do not assume that a higher release-chemical addition will solve mechanical problems.
Published Aupha Chem product options
These are links to existing product descriptions, not claims of universal suitability. Check current grade-specific TDS, SDS, sample requirements and trial results before ordering.
Creping Adhesive Agent
Review its role in controlled sheet adhesion on the Yankee dryer.
Creping Modifying Agent
Review its role within the current Yankee treatment program.
Mineral Oil-Based Stripping Agent for Tissue Paper
Published tissue-sheet release chemistry for process trials.
Silicone-Based Stripping Agent
Alternative listed stripping-agent chemistry for compatibility screening.
Prepare an effective quotation request
Provide the details below so a relevant grade can be shortlisted and any missing engineering data can be identified.
- Tissue grade, basis weight, furnish and machine speed
- Yankee diameter, temperature, blade and spraying configuration
- Current creping/release agents, addition points and observed issue
- Monthly demand, destination, trial criteria and required documentation
Frequently asked buyer questions
Are a creping modifier and a stripping agent interchangeable?
No. They address distinct roles within a coating and release program; their compatibility should be established under the mill’s actual conditions.
Can you provide a universal dosage?
No. Application rates and conditions require the grade-specific TDS and controlled trials.
Which product should be trialed first?
Identify whether the main problem is sheet adhesion, uncontrolled release, blade condition or coating deposits, then shortlist relevant chemistry.
Dryer sticking in packaging paper
For packaging paper or paperboard, see the dryer cylinder sheet release guide for break counts, cylinder observations and trial targets.
Request the right chemical grade
Tell us about the production process, target performance, current product and planned order volume. Ask for technical information, a trial sample or a quotation.
