
Paper Coating Agents · Top Coating
SBR Latex for Top Coating
SBR Latex for Top Coating is a water-based anionic binder for pigmented paper coatings. The top-coat grade is selected to support coating performance, surface smoothness and printability within the complete formulation.
Use the published data as a starting point for grade evaluation. Confirm the current TDS, test conditions and compatibility with all coating-color components before a trial.
Appearance listed for the published grade.
Confirm the specification for the supplied grade.
Confirm the current Tg, test method and available options for the supplied grade.
Application and grade selection
The latex is used as a binder in the top layer of coated paper and paperboard. Evaluate coating strength, surface smoothness, printability and performance with the pigments and additives in your formulation.
Information to share before evaluation
- Paper grade and end use
- Pigment system and coating-color solids
- Coater configuration and application conditions
- Target surface smoothness, printability and coating strength
- Current formulation and any known compatibility constraints
Published technical data
The values below are the published specifications for SBR Latex for top coating.
| Appearance | Milky white liquid |
|---|---|
| Solid Content | 50% |
| pH Value | 6.0–8.0 |
| Ionic Type | Anionic |
| Viscosity | ≤300 cps |
| Glass Transition Temperature (Tg) | 13 °C listed in the product catalogue; confirm the current grade-specific TDS and test method |
| Application | Top coating |
Confirm the current TDS, test conditions, storage requirements and compatibility with the complete formulation with Aupha Chem.
Evaluation in your process
Before a production trial, confirm product preparation and addition sequence, compatibility with pigments and other components, and operating conditions against the current technical documentation. Compare results on the target paper grade.
Dosage and operating conditions depend on the formulation, paper grade, coat weight and equipment. No generic dosage is stated here.
What should the top-coat trial measure?
Record the paper grade, underlying coat and top-coat formulation. Compare the finished sheet against the current grade using the mill’s surface and printability tests. Document any changes in coating viscosity or drying conditions.
Discuss SBR Latex for Top Coating
Share the paper grade, coating formulation and target properties so we can review a suitable grade for evaluation.
Request Product Information