
Paper Coating Agents · Primary Coating
SBR Latex for Primary Coating (Precoat)
SBR Latex for Primary Coating is a water-based anionic binder for pigmented paper coatings. The primary-coat (precoat) grade is selected according to the formulation, coater conditions and required coating strength.
Use the published data as a starting point for grade evaluation. Confirm the current TDS, test conditions and compatibility with the complete formulation before a trial.
Appearance listed for the published grade.
Confirm the specification for the supplied grade.
Confirm the current Tg, test method and available options for the supplied grade.
Application and grade selection
The latex is used as a binder in the primary layer of coated paper and paperboard. Evaluate adhesion to the base sheet, pigment binding and coating strength in the target formulation.
Information to share before evaluation
- Paper grade and end use
- Pigment system and coating-color solids
- Coater configuration and application conditions
- Target surface properties, printability and strength requirements
- Current formulation and any known compatibility constraints
Published technical data
The values below are the published specifications for SBR Latex for primary-coating.
| Appearance | Milky white liquid |
|---|---|
| Solid Content | 50% |
| pH Value | 6.0–8.0 |
| Ionic Type | Anionic |
| Viscosity | ≤300 cps |
| Glass Transition Temperature (Tg) | 0 °C listed in the product catalogue; confirm the current grade-specific TDS and test method |
| Application | Primary coating |
Confirm the current TDS, test conditions, storage requirements and compatibility with the complete formulation with Aupha Chem.
Evaluation in your process
Before a production trial, confirm product preparation and addition sequence, compatibility with pigments and other components, and operating conditions against the current technical documentation. Compare results on the target paper grade.
Dosage and operating conditions depend on the formulation, paper grade, coat weight and equipment. No generic dosage is stated here.
What should the primary-coat trial measure?
Record the base paper, pigment blend and coat weight. Compare the coating integrity and pigment binding against the current primary coat. If a top coat follows, hold its formulation constant for the comparison.
Discuss SBR Latex for Primary Coating
Share the paper grade, coating formulation and target properties so we can review a suitable grade for evaluation.
Request Product Information