
Paper Sizing Agents · Styrene-acrylic
Styrene-acrylic Surface Sizing Agent for Paper
A surface sizing emulsion for paper and paperboard. Depending on the grade, it may be cationic or anionic and can be evaluated for water resistance, surface strength and print performance.
Use the published product data below as a starting point for grade evaluation. Confirm the current TDS, test methods and operating limits before a trial.
Appearance listed in the published product information.
Confirm the specification for the selected grade.
Evaluate water resistance, surface strength and print performance.
Application and grade selection
Styrene-acrylic Surface Sizing Agent is used for paper and paperboard surface treatment. Assess the suitable grade against the required water resistance, surface strength and print quality.
Information to share before evaluation
- Paper grade, sizing method and target surface properties
- Fiber furnish and additives currently in use
- Required ionic type and current addition sequence
- Process conditions and available pH and temperature data
- Test method and indicators to track during a mill trial
Published technical data
The values below reproduce the published specifications for Styrene-acrylic Surface Sizing Agent.
| Appearance | Light yellow-brown emulsion |
|---|---|
| Solid Content | 25–30% |
| pH Value | 2.0–6.0 |
| Ionic Type | Cationic / Anionic |
| Viscosity | 50 cps |
| Application | Paper surface sizing |
Viscosity test conditions are not listed here. Actual performance depends on furnish, formulation and operating conditions. Validate grade suitability through controlled trials.
How to evaluate the product
Before a production trial, confirm the required ionic type, product preparation and addition sequence against the current TDS and the mill’s chemical program. Evaluate water resistance, surface strength and print performance on the target paper grade.
Dosage and operating limits depend on the paper grade, formulation and process conditions. We do not recommend a generic dosage without reviewing the system.
How should buyers compare styrene-acrylic and AKD surface sizing?
Compare them on the intended paper grade with the same water-resistance test. Provide the size press conditions, required ionic type and surface-strength or print targets, since water resistance is only one of the evaluation criteria.
Discuss a Styrene-acrylic Surface Sizing Agent evaluation
Share the paper grade, required ionic type, sizing method and target surface properties so our team can review the application.
Request Product Information