Poly Aluminium Chloride (PAC)

Yellow powder PAC in a glass dish

Water Treatment · Coagulant

Poly Aluminium Chloride (PAC) Powder

Poly aluminium chloride (PAC) is an inorganic coagulant supplied as a yellow powder for water and wastewater treatment. Its suitability depends on the raw water, treatment objective and process conditions.

Use the published specifications below as a starting point for evaluation. Confirm current grade-specific data and handling instructions with Aupha Chem before a trial.

Product formYellow powder

Appearance listed in the published PAC specifications.

Product typeInorganic coagulant

Review grade suitability against raw water and process conditions.

Application focusCoagulation

For evaluation in water and wastewater clarification processes.

Application and process fit

PAC is used as a coagulant in water and wastewater treatment. The appropriate grade and operating conditions depend on water characteristics, treatment targets, pH and the existing process.

Information to share before evaluation

  • Water source and key water-quality parameters
  • Treatment objective and target water-quality results
  • Current coagulants or other treatment chemicals and dosing points
  • Process pH, equipment and operating constraints
  • Available jar-test observations or trial results

Published technical data

The values below are the published PAC specifications. Confirm the current technical data sheet, test methods and grade-specific limits before use.

AppearanceYellow powder
Aluminium Oxide (Al₂O₃)29%
Basicity70–90%
pH (1% aqueous solution)3.0–5.0
Water Insoluble Matter≤0.5%

Published values are product specifications, not a universal operating recipe. Confirm current specifications and application conditions with Aupha Chem.

How to evaluate PAC

Compare PAC using representative water samples and a jar test that reflects the treatment objective and process conditions. Evaluate the selected grade with the current product instructions and confirm operating conditions through appropriate trials.

Dosage and results depend on the water, process and treatment targets. Share these details to support a relevant grade review.

Where does PAC fit in the treatment sequence?

Evaluate PAC at the coagulation stage. If the plant also uses PAM, report the order of addition and compare clarification results for the complete program. Share the incoming water pH, solids and treated-water target.

Read the PAC vs. PAM selection guide

Plan a PAC and PAM clarification jar test

Discuss a PAC evaluation

Share your water characteristics, treatment objective, current process and target results to request product information.

Request Product Information

← View all Water Treatment Chemicals