Cationic Polyacrylamide (PAM)

White powder PAM in a glass dish

Water Treatment · Flocculant

Cationic Polyacrylamide (PAM) Powder

Cationic polyacrylamide is offered as a powder flocculant for water and wastewater treatment. Product selection depends on water characteristics, the separation objective and the treatment process.

Use the information below as a starting point for evaluation. Confirm the grade-specific technical data and preparation instructions with Aupha Chem before a trial.

Product formWhite particles or powder

Appearance listed in the published PAM specifications.

Product typeCationic

Confirm the suitable grade against the water and process conditions.

Application focusFlocculation

For evaluation in clarification, solid–liquid separation or sludge dewatering processes.

Application and process fit

PAM flocculant supports particle aggregation to aid solid–liquid separation. The appropriate grade and operating conditions depend on water quality, suspended solids, process chemistry and equipment.

Information to share before evaluation

  • Water source and key water-quality parameters
  • Treatment objective: clarification, wastewater treatment or sludge dewatering
  • Current coagulants or other treatment chemicals and dosing points
  • Process pH, equipment and operating constraints
  • Target results and available jar-test or trial observations

Published technical data

The values below are the published PAM specifications. Confirm that they apply to the selected cationic grade and request the current technical data sheet before use.

Ionic TypeCationic
AppearanceWhite particles or powder
Molecular Weight≥100 × 10⁴
Solid Content≥90.0%
Acrylamide Monomer Content (dry basis)≤0.02%
Dissolution Time≤60 min
Screening Residue (180 μm sieve)≥88%

Published values are product specifications, not a universal operating recipe. Confirm test methods and grade-specific limits with Aupha Chem.

How to evaluate the product

Compare candidate grades with representative water samples and confirm the preparation method using the current product instructions. Establish dosage and operating conditions through jar tests and, where appropriate, plant trials.

Dosage depends on the water, treatment objective, chemical program and process equipment. Share these details to support a relevant grade review.

What should a sludge dewatering trial measure?

State the sludge source, feed solids and dewatering equipment. Compare cake dryness and filtrate quality with the current program, and record the polymer demand under each trial condition.

Read the PAC vs. PAM selection guide

Compare sludge dewatering trial results and polymer consumption →

Discuss a cationic PAM evaluation

Share your water characteristics, treatment objective, current process and target results to request product information.

Request Product Information

← View all Water Treatment Chemicals